- Researchers combined lithium iron phosphate with nickel manganese cobalt material in a solid-state battery cathode.
- X-ray measurements revealed that the extent of charging varied across the cathode.
- The team also modelled thermal behaviour. The work is a guide for further engineering and manufacturing tests.
Inside this story 2 perspectives
When Simon Si Ming Ji first looked at the X-ray results from a solid-state battery, he was hoping for an orderly handover. The positive electrode contained two materials chosen for different strengths. Ji expected to see one give way to the other as the battery discharged. Instead the reactions appeared to overlap. The puzzle took more than a sharper picture. It required measurements from different places inside the battery.
Princeton Engineering recounted the experiment on 9 September, following publication of the research in Advanced Energy Materials in July. A group led by Kelsey Hatzell worked with researchers at Brookhaven National Laboratory to study a blend of lithium iron phosphate, or LFP, and a nickel manganese cobalt material commonly called NMC. Engineers already use both in batteries. The question was how the two would behave together in a solid-state device, including how much heat it could generate.
A measurement with an address
The cathode is the battery’s positive electrode during discharge. Different cathode materials make different trade-offs. LFP can supply and accept substantial power. NMC can store considerable energy for its mass, although managing heat can be a concern. Putting both in the same design offers a way to explore those characteristics together. It also makes it harder to tell which part of a measurement came from which material.
A battery in operation is an awkward object to take apart for a look. Its components are dense, and the physical contact between them matters to the way the cell works. At Brookhaven, intense X-rays from a synchrotron allowed the team to investigate while the battery was operating. To turn an initial scan into a spatial picture, the researchers had to realign the sample against a fixed beam repeatedly.
They found a gradient. Different locations in the cathode had reached different states of charge. Averaging regions together made their reactions appear to overlap, even though knowing where the measurement came from helped explain the pattern. A current or voltage recorded for the whole cell can conceal activity that varies across the material inside it.
What a manufacturer would want to know
The team used the measurements alongside thermal modelling to study the stability of the blend. That provides a starting point for examining different proportions, particle shapes and charging routines. It does not specify how long a commercial battery would last or how quickly a driver could recharge it. Those answers also depend on the rest of the cell and how it is made.
For an engineer, the worthwhile question raised by the experiment is where to look next. A promising average can hide a region working harder than its neighbours. A map of that variation gives a designer somewhere to test an adjustment, then return with the same instrument to see what changed.



